Established in 1998, China Xiaowei Bearing Co., Ltd. is a high-tech enterprise specializing in thrust ball bearing manufacturer and design many kinds of bearings. We have a modernized staffs of tech research and fog machine development, ISO9001 certificated, and manufacturing adopts advanced domestic and foreign standards such as GB, API, JIS, DIN, BS, NF and ANSI.

High quality bearings with competitive prices
Quality standard: P0, chrome steel, steel cage or bronze cage
Extensively used for live centers in lathes, lead screws, automotive clutches,
kingpin supports and speed reducers
Used in oil drilling machine, screw shaft of oceangoing freighter,
combining driving machine, overhead crane, heavy tower crane turntable,
and turntable of drilling machine
Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve.
The thrust ball bearings have flat housing washers. They do not allow any misalignment between the shaft and the housing or angle between their support surfaces. They are manufactured to normal tolerance as standard. They are available in pressed steel and machined brass or steel cage. For satisfactory operations, they should be subject to a minimum load.

Material: GCr15 grade steel with oxygen content less than 20ppm
Hardness for rings and rollers: 59 - 63HRC
Bearing dimensions and tolerance levels comply with the latest ISO standards
This type of bearings is separable, which can only carry axial load. The single direction bearings of them can only carry axial load in one direction. Before using they have to be preloaded. The thrust ball bearings are used in lathe centers, automobile clutches, and reducers. The sizes are 51100-51132, 51200-51224, and 51304-51326, F M, and F GOuter packing: Standard export packingOr according your requirement .
These bearings consist of one row of balls, which rotate, between a housing washer and a shaft washer. They are separable type and can be mounted separately. Single direction thrust ball bearings, can accommodate axial loads in one direction and locate a shaft axially in one direction. They are not suitable to any radial load.