Established in 1998, China Xiaowei Bearing Co., Ltd. is a high-tech enterprise specializing in transmission coupling manufacturer and design many kinds of bearings. We have a modernized staffs of tech research and fog machine development, ISO9001 certificated, and manufacturing adopts advanced domestic and foreign standards such as GB, API, JIS, DIN, BS, NF and ANSI. Our custom transmission couplings are exported to countries and regions in Europe(UK, France, Italy, Germany), North America(USA, Canda), the Middle East and Southeast Asia.

UNIVERSAL Star Couplings ensures quick and easy installation in reciprocating pumps, generator sets, diesel and gas engines and other such drives, in a way, coupling installation requires no special tools due to simple construction, every other spider arm is an idler and can be advanced to the load carrier jaws & thus functioning as a spare spider in every coupling. Range comprises of various sizes of ODs.
UNIVERSAL Tyre Couplings ensures high torque transmitting capacity in generators and electric motors in various industrial establishments, in a way, the tyre material is made from neoprene/natural/synthetic rubber compounds reinforced with Rayon/Nylon/Polyester Cord to give superior rating & long durability, bore size is well matched to attain maximum speed (rpm) ensuring minimum to nil slippage of the flexible element out from the coupling assembly in case of any faulty installation. Range comprises of ConventionalTyre. (TC),H.R.C.Type,Multidirectional(F),NewGeneration(PH),Boresizes 6 to 280mm. UNIVERSAL Pin Bush Couplings ensures high torque transmissions at high speeds, in a way, coupling have remarkable shock absorption capacity due to construction being cushioned drive type transmitting the torque through rubber bushes, unaffected by water, dust and atmospheric conditions permits drive in either direction requiring no lubrication and no adjustment after fitting.

We manufacture ‘v’ belt transmission pulley for spa design & abcd section and from single groove to 10-groove section & from 100 mm dia to 450 mm dia. These pulleys are fully machined, dynamically balanced & manufactured as per customer design also. Our content of manufacture pulley is around 600 nos. Our esteemed customer for pulleys are: Atlas Copco (I) Ltd., Pune. Burckhardt Compression (I) Pvt. Ltd. Pune Walchandnagar Industries Ltd. Walchandnagar. For rear-wheel-drive vehicles with manual or automatic transmissions, the Drive Shaft Coupling disengages the drive shaft, and thus the transmission. Essentially a mechanical clutch, the Drive Shaft Coupling is installed at the rear of the drive shaft, near the differential. Activate the control knob from the driver's seat of the towed vehicle and the clutch is disengaged for towing or engaged for driving. A shorter drive shaft is needed because it is located between the drive shaft and differential. REMCO custom builds new replacement drive shafts with the coupling installed or the existing drive shaft can be reworked by REMCO to fit.